> For the complete documentation index, see [llms.txt](https://inspinia-technology.gitbook.io/skyplatform/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://inspinia-technology.gitbook.io/skyplatform/skyplatform-technical-user-documentation/basics-of-skyplatform/creating-a-new-project/installation-of-add-on-cards.md).

# Installation of Add-On Cards

1. The 8" and 10" Panels have two Add-On ports located under the cover on the back of the units.

<figure><img src="/files/UcDZCzG2MBQ3QEPrsren" alt=""><figcaption></figcaption></figure>

2. After the appropriate Add-On module (KNX, Modbus, INELS, VRF) is selected and installed into the designated ports, the cable connections are made to the Add-On via the black and blue terminals. Subsequently, during the online programming phase or while creating a template for future use, the Add-On type is selected from the "Device" menu and integrated into the system configuration.

<figure><img src="/files/gwqJoGxZuZTUhoirU4xG" alt="" width="395"><figcaption><p>The <strong>Device Menu</strong> is where Add-Ons connected through the device's ports are activated and configured.</p></figcaption></figure>